GPS unit for the car's 12V socket
A small, flexible device equipped with USB inputs for charging e.g. mobile phone.
This is how it works
The GPS unit is plugged into the 12V socket. It starts up and sends positions as soon as the vehicle starts
The GPS unit is easy to install and remove. For this reason, we recommend, if possible, placing the unit in a socket in the luggage compartment or around the rear seat.
The unit itself is stable and is firmly attached to 12 volt socket. Should the car be driven without the unit in the socket, an e-mail alert will be received. The unit also contains two USB inputs to facilitate the charging of other devices.
It does not get easier than this. The unit is small in size and is easily placed in the car’s 12V socket.
The device is plugged directly into the car’s 12 volt socket and is equipped with two USB inputs that can be used to charge a mobile phone or other equipment during the journey. The device also has a battery that continues to report positions if the device is removed.
WorkMirror Track Transmitter is designed with features that makes it work for its purpose
|Buffert minne||1.000 positioner|
|Känslighet||- 162 dBm|
Get started in a few seconds
Place the unit in the 12V socket
Connect the device to the vehicle in the WorkMirror web portal and start driving.